How To Root AT&T Galaxy S4 SGH-I337 on Android 4.4.4 KitKat Firmware


This blog will not be held responsible if anything goes wrong during or after the rooting process. As wrong firmwares may brick your device. Please proceed at your own risk.


  • Check twice your device’s model, this tutorial is only applicable for the Samsung Galaxy S4 AT&T, Model number SGH-I337. Do not try it on the other model.
  • Take a proper backup of your Galaxy S4 such as SMS, MMS, Contacts and Media Storage etc.
  • Enable USB Debugging by navigating to Settings > Developer Options > USB Debugging
  • Download & Install Samsung Galaxy S4 Drivers
  • Make sure that your device’s battery is charged at least about 80% to avoid shut downs.


Download SuperSU
Download Odin v3.10.0
Download Towel Root APK


Step No 1:- First of all, get the I337UCUFNJ4 Firmware update on your Samsung Galaxy S4 manually or via OTA.

Step No 2:- Extract the Odin Flashing Tool on the desktop of your PC that you have already downloaded from the above link.

Step No 3:- Now run Odin Tool as an Administrator on your PC.

Step No 4:- Put your AT&T Galaxy 4 into the Download Mode, to do this Turn Off your Galaxy S4 first and then press and hold Home + Power + Volume Down keys altogether.

Step No 5:- While your Galaxy S4 is in Download Mode, plug it to the PC through USB cable. Once your device properly connected to the PC, the ID:COM section will turn yellow / blue.

Step No 6:- Now click on “AP” / “PDA” tab in the Odin and locate the firmware I337_NC1_Stock_Kernel file.

Step No 7:- Click on “Start” button to start the flashing process to update your device. Your device will be rebooted, once the firmware is updated.

Step No 8:- Your device is now updated with the I337_NC1_Stock_Kernel firmwares. Next, star the rooting process of your Galaxy S4.

Step No 9:- Copy the TowelRoot App into the internal/external memory of your device. Now reboot the device and run Towelroot app on it.

Step No 10:- Launch the towel root app on your Samsung Galaxy S4 and press the button “Make it Rain” to root your device.

Step No 11:- It will root your phone now its the time to flash the I337_NJ4_Stock_Kernel via Odin flashing tool to get back to the stock NJ4 kernel.

Step No 12:- Finally, again reboot the Galaxy S4 and download the SuperSU app from the above link, SuperSu App enables you to manage root permissions on your device.

Note: Extreme lag may appear on your device making it unable to install Towel root after flashing the NJ4 firmware. Just give a reboot to your Galaxy S4 AT&T once and try again. Now everything will be set.

Done! You’ve successfully rooted AT&T Samsung Galaxy S4 SGH-I337 on Android 4.4.4 KitKat (I337UCUFNJ4) firmware. 


Entradas populares de este blog

Clave WPA2 por Defecto de equipos TotalPlay (Huawei HG8245H)

Cable modem Ubee - WPA2 y WPS por defecto