FreeBSD 10.1 en Dell Inspiron 710m

Salida del dmesg por defecto:

 Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 22:51:51 UTC 2014 i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Family = 0x6  Model = 0xd  Stepping = 6
real memory  = 1073741824 (1024 MB)
avail memory = 1012105216 (965 MB)
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <PTLTD Montara> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 11 at device 2.0 on pci0
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 16252k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
uhci0: LegSup = 0x3f00
usbus0 on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 10 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 10 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff irq 11 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
iwi0: <Intel(R) PRO/Wireless 2915ABG> mem 0xe0206000-0xe0206fff irq 10 at device 1.0 on pci2
cbb0: <TI6420 PCI-CardBus Bridge> at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI6420 PCI-CardBus Bridge> at device 4.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <serial bus, FireWire> at device 4.2 (no driver attached)
pci2: <mass storage> at device 4.3 (no driver attached)
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xe0204000-0xe0205fff irq 10 at device 5.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100 media interface> PHY 1 on miibus0
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:14:22:8a:f0:18
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ppc1: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff,0xce000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe1fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HTS541080G9AT00 MB4OA61A> ATA-6 device
ada0: Serial Number MPB4PAX6JNSNAM
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <PHILIPS CDRW/DVD SCB5265 TD15> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Root mount waiting for: cbb1 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: cbb1 usbus3
uhub3: 5 ports with 5 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
iwi0: timeout waiting for (null) firmware initialization to complete
iwi0: could not load boot firmware (null)
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel i852GM/i855GM GMCH> on vgapci0
info: [drm] AGP at 0xe8000000 128MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xda
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xc5
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xc5
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xc5
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xc5
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xc5
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xc5
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xc5
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] failed to find VBIOS tables
drmn0: taking over the fictitious range 0xe8000000-0xeffff000
info: [drm] initialized overlay support
fbd0 on drmn0
info: [drm] Initialized i915 1.6.0 20080730
iwi0: timeout waiting for (null) firmware initialization to complete
iwi0: could not load boot firmware (null)

Intel(R) PRO/Wireless 2915ABG

iwi0: <Intel(R) PRO/Wireless 2915ABG> mem 0xe0206000-0xe0206fff irq 10 at device 1.0 on pci2

El wireless no lo detecta bien, aun agregando la linea de la licencia en el /boot/loader.conf


Al momento de tratar de levantar la interfaz muestra error:

#ifconfig iwi0 up
iwi0: timeout waiting for (null) firmware initialization to complete
iwi0: could not load boot firmware (null)

Debemos de crear una interfaz apartir de la original:

ifconfig wlan0 create wlandev iwn0
ifconfig wlan0 up
ifconfig wlan0 scan

Y debe de funcionar.

Despues de configurar el XDM para inicie sesion directamente en modo grafico, configurar el Entorno e16, el equipo funciona muy bien.


Entradas populares de este blog

Clave WPA2 por Defecto de equipos TotalPlay (Huawei HG8245H)

Cable modem Ubee - WPA2 y WPS por defecto